{"id":3404,"date":"2017-04-28T19:42:05","date_gmt":"2017-04-28T19:42:05","guid":{"rendered":"http:\/\/galootopia.com\/old_tools\/?p=3404"},"modified":"2018-01-17T03:09:29","modified_gmt":"2018-01-17T03:09:29","slug":"glue-jernbolaget-label","status":"publish","type":"page","link":"https:\/\/rarebit.com\/old_tools\/chisels\/swedish-chisels\/jernbolaget-chisels\/glue-jernbolaget-label\/","title":{"rendered":"Gluing a Jernbolaget Label"},"content":{"rendered":"

The label fell off of this minty Jernbolaget chisel recently.<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

 <\/p>\n

The label is foil on a paper backing. It is embossed with a raised trademark, lettering, and oval perimeter.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

The label was originally glued on with hide glue. I did not want to remove the hide glue for fear of damaging the label. I did a little research and felt that fish glue would would be the best glue to use in this case. It should bond to both the hide glue on the label and the shellac on the handle. It is very tacky and has a long working time. Any excess glue can be cleaned up with water.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

I had a quick look at the other chisels in the set to determine label position and alignment. I also got the fish glue ready (it was stored in the fridge and needs to be warmed to room temperature ) and found a small paint brush and some elastic bands.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

I squeezed some fish glue on the bottom of a clean plastic container, then applied glue to the chisel label.<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

 <\/p>\n

After applying a thin and even coat of glue I carefully positioned the label back on its original spot. I was able to see a very light outline of the label’s original position. I then carefully wrapped two elastic bands around the handle, holding the label firmly in place. The elastics should not be wrapped too tight to prevent them from marring the label.<\/p>\n

I took the elastics off after about an hour and carefully cleaned off the small amount of squeeze out with q-tips and warm water. (If I had had more squeeze out, I would have cleaned it up before putting on the elastics). Then I wrapped the elastics back around the label and set the chisel aside while the glue dried.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

After 12 hours, I took the elastics off. The glue had cured and the label looks good.<\/p>\n

\"\"<\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

The label fell off of this minty Jernbolaget chisel recently.   The label is foil on a paper backing. It is embossed with a raised trademark, lettering, and oval perimeter.   The label was originally glued on with hide glue. …<\/p>\n

Gluing a Jernbolaget Label<\/span> Read More »<\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"parent":3541,"menu_order":50,"comment_status":"open","ping_status":"open","template":"","meta":{"footnotes":""},"class_list":["post-3404","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/rarebit.com\/old_tools\/wp-json\/wp\/v2\/pages\/3404","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/rarebit.com\/old_tools\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/rarebit.com\/old_tools\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/rarebit.com\/old_tools\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/rarebit.com\/old_tools\/wp-json\/wp\/v2\/comments?post=3404"}],"version-history":[{"count":1,"href":"https:\/\/rarebit.com\/old_tools\/wp-json\/wp\/v2\/pages\/3404\/revisions"}],"predecessor-version":[{"id":4056,"href":"https:\/\/rarebit.com\/old_tools\/wp-json\/wp\/v2\/pages\/3404\/revisions\/4056"}],"up":[{"embeddable":true,"href":"https:\/\/rarebit.com\/old_tools\/wp-json\/wp\/v2\/pages\/3541"}],"wp:attachment":[{"href":"https:\/\/rarebit.com\/old_tools\/wp-json\/wp\/v2\/media?parent=3404"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}